AEC Site Solutions Milling and Paving, we are a progressive paving company capable of paving residential, commercial, city and state department of transportation projects. We offer free estimates and advice on asphalt build ups. We also remove failed
asphalt by means of milling or saw cutting depending on needs of owner. We place curb and gutter, striping and signage. We offer seal coating as a lower cost to pavement maintenance.
Chris Miller: 256-640-9255
Asphalt pavement refers to any paved road surfaced with asphalt. Hot Mix Asphalt (HMA) is a combination of approximately 95% stone, sand, or gravel bound together by asphalt cement, a product of crude oil. The resulting Hot Mix Asphalt is loaded into trucks for transport to the paving site.
Pavement milling (cold planning, asphalt milling, or profiling) is the process of removing at least part of the surface of a paved area such as a road, bridge, or parking lot. Milling removes anywhere from just enough thickness to level and smooth the surface to a full depth removal. There are a number of different reasons for milling a paved area instead of simply repaving over the existing surface. Let AEC Site Solutions help you in deciding which is the best plan for you. We specialize in the milling process and our expert crew will help give you the result you are looking for.
What is asphalt striping? It is essentially the process of applying or re-applying marks and signs on roadways, pavements, and parking lots using paint or molten thermoplastic. In the United States, asphalt striping is a requirement for all business establishments with pavements and parking lots. If you’re looking to complete a paint project on a parking lot, roadway, or sports courts, search no further. AEC Site Solutions carries high-quality striping equipment to keep your company or organization's parking lines in prime condition. Here at AEC Site Solutions, we take pride in our striping crew and the professional work they do. In addition, we make sure that the job you are doing is current with all OSHA and ALDOT striping requirements.
Asphalt concrete base is a dense-graded stone base with a larger nominal maximum aggregate size (1 inch) intended for use as a base course for asphalt or concrete. In addition to site paving benefits, DGB can provide strength for many reasons. Let our experts at AEC Site Solutions explain the process and help with your paving needs.
Copyright © 2021 AEC Site Solutions LLC